Serving our customers with quality and safety first.
2a nut thread
2a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.562in. nut thread and 0.594in. nut thread ⁓19/32"
0.625in. stud thread and 0.656in. stud thread ⁓21/32"
1.438in. ⁓1-29/64"
18 stud thread
24 nut thread
36.0 rockwell c and 44.0 rockwell c
0.312in. nut thread ⁓5/16"
0.312in. stud thread ⁓5/16"
steel comp 4140
sae assn std single material response
cadmium or zinc
unc stud thread
unf nut thread
Unf nut thread
Unc stud thread
Steel comp 4140
24 nut thread
18 stud thread
0.625 inches minimum stud thread and 0.656 inches maximum stud thread
0.562 inches minimum nut thread and 0.594 inches maximum nut thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
unf nut thread thread series cadmium or zinc surface treated 24 nut thread thread quantity per inch 1.438" overall length 0.625" stud thread thread length right-hand stud thread 2a stud thread thread class
1. | 520-0011 | Cage 44940 |
2. | 020049 | Cage 61510 |
3. | 520A11 | Cage 44940 |
4. | 5307003583557 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.