Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 171A423PC60 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut THREADRIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
2.500in. nut THREAD1.760in. stud thread ⁓1-49/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
6.760in. ⁓6-49/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
8 nut THREAD8 stud thread
A designation that is used for the purpose of general identification of the thread.
1.375in. nut THREAD1.375in. stud thread ⁓1-3/8"
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
navy special project
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
1.180 in. protrusion, 0.500 in. long on stud end; nom. thread size is given at the stud and nut ends, threads taper down 0.005 in. per inch from ends
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
C50AF9-B16, cage 01289 mfr ref single material response
Answers.
1EA
Steel
8 nut thread8 stud thread
2.500 inches nut thread1.760 inches stud thread
Right-hand nut threadright-hand stud thread
FSC 5307 ⁓ Studs
NSN 5307-00-827-1281 STUD,PLAIN
1.180 in. protrusion, 0.500 in. long on stud end; nom. thread size is given at the stud navy special project 8 nut THREAD8 stud thread thread quantity per inch 6.760" overall length 2.500" nut THREAD1.760" stud thread thread length right-hand nut threadright-hand stud thread
- NIIN
- 008271281
- NIIN Date
- 08/23/67
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- QUP
- 1
- Historical Price
- $680.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for 171A423PC60 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
171A423PC60 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
