Serving our customers with quality and safety first.
3a nut thread
3a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.340in. nut thread ⁓11/32"
0.340in. stud thread ⁓11/32"
1.530in. ⁓1-17/32"
0.120in. first hole
0.076in. first hole and 0.086in. first hole
24 nut thread
24 stud thread
0.312in. nut thread ⁓5/16"
0.312in. stud thread ⁓5/16"
125.0 microinches
additional cotter pin hole on other end 0.076 in. min, 0.086 in. max dia 0.120 in. from end
steel comp E4340
MIL-S-5000 mil spec single material response
unf nut thread
unf stud thread
1EA
Unf stud thread
Unf nut thread
Steel comp e4340
24 stud thread
24 nut thread
0.340 inches stud thread
0.340 inches nut thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
unf stud thread thread series additional cotter pin hole on other end 0.076 in. min, 0.086 in. max dia 0.120 in. from end 24 stud thread thread quantity per inch 1.530" overall length 0.340" stud thread thread length right-hand stud thread 3a stud thread thread class
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.