Serving our customers with quality and safety first.
3a nut thread
+0.2211/+0.2235in. stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.490in. stud thread ⁓1/2"
0.427in. nut thread ⁓7/16"
1.115in. and 1.135in. ⁓1-9/64"
20 stud thread
28 nut thread
26.0 rockwell c and 32.0 rockwell c
0.250in. nut thread ⁓1/4"
0.250in. stud thread ⁓1/4"
stud end chamfered 45.0 deg by 0.030 in. min 0.060 in.max deep, nut end chamfered 45.0 deg by 0.020 in.min 0.050 in.max deep
steel
cadmium
ams 2400 assn std single treatment response
unc stud thread
unf nut thread
Unf nut thread
Unc stud thread
Steel
28 nut thread
20 stud thread
0.427 inches minimum nut thread
0.490 inches minimum stud thread
Right-hand stud thread
Right-hand nut thread
3a nut thread
FSC 5307 ⁓ Studs
unf nut thread thread series cadmium surface treated stud end chamfered 45.0 deg by 0.030 in. min 0.060 in.max deep, nut end chamfered 45.0 deg by 0.020 in.min 0.050 in.max deep 28 nut thread thread quantity per inch 1.115" overall length 0.427" nut thread thread length right-hand stud thread 3a nut thread thread class
1. | 186211 | Cage 06848 |
2. | 186211 | Cage 06840 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.