Serving our customers with quality and safety first.
2a nut thread
5a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.938in. nut thread ⁓61/64"
1.125in. stud thread ⁓1-1/8"
2.062in. ⁓2-1/16"
14 stud thread
20 nut thread
0.438in. nut thread ⁓29/64"
0.438in. stud thread ⁓29/64"
steel comp 1109 or steel comp 1110 or steel comp 1116 or steel comp 1117 or steel comp 1118 or steel comp 1119 or steel comp 1132 or steel comp 1137 or steel comp 1139 or steel comp 1140 or steel comp 1141 or steel comp 1144 or steel comp 1145 or steel comp 1146 or steel comp 1151 or steel comp 1211 or steel comp 1212 or steel comp 1213 or steel comp 1215 or steel comp B1111 or steel comp B1112 or steel comp B1113
cadmium and chromate
unc stud thread
unf nut thread
1EA
Unf nut thread
Unc stud thread
Steel comp 1109 or steel comp 1110 or steel comp 1116 or steel comp 1117 or steel comp 1118 or steel comp 1119 or steel comp 1132 or steel comp 1137 or steel comp 1139 or steel comp 1140 or steel comp 1141 or steel comp 1144 or steel comp 1145 or steel comp 1146 or steel comp 1151 or steel comp 1211 or steel comp 1212 or steel comp 1213 or steel comp 1215 or steel comp b1111 or steel comp b1112 or steel comp b1113
20 nut thread
14 stud thread
1.125 inches maximum stud thread
0.938 inches maximum nut thread
Right-hand stud thread
Right-hand nut thread
5a stud thread
2a nut thread
FSC 5307 ⁓ Studs
unf nut thread thread series cadmium surface treated 20 nut thread thread quantity per inch 2.062" overall length 1.125" stud thread thread length right-hand stud thread 5a stud thread thread class
1. | 5307007534110 | Cage SCY13 |
2. | 5307007534110 | Cage SCY13 |
3. | 5307007534110 | Cage SCY13 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.