Serving our customers with quality and safety first.
2a nut thread
2a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.970in. stud thread ⁓63/64"
1.780in. nut thread ⁓1-25/32"
2.750in. ⁓2-3/4"
11 nut thread
11 stud thread
0.625in. nut thread ⁓5/8"
0.625in. stud thread ⁓5/8"
color black for phosphate surface or color silver for cadmium
steel comp 1013 or steel comp 1015 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1025 or steel comp 1026 or steel comp 1029 or steel comp 1030 or steel comp 1033 or steel comp 1034 or steel comp 1035 or steel comp 1037 or steel comp 1038 or steel comp 1039 or steel comp 1040 or steel comp 1016
cadmium or phosphate
unc nut thread
unc stud thread
1EA
Unc stud thread
Unc nut thread
Steel comp 1013 or steel comp 1015 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1025 or steel comp 1026 or steel comp 1029 or steel comp 1030 or steel comp 1033 or steel comp 1034 or steel comp 1035 or steel comp 1037 or steel comp 1038 or steel comp 1039 or steel comp 1040 or steel comp 1016
11 stud thread
11 nut thread
1.780 inches nut thread
0.970 inches stud thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
unc stud thread thread series cadmium or phosphate surface treated color black for phosphate surface or color silver for cadmium 11 stud thread thread quantity per inch 2.750" overall length 1.780" nut thread thread length right-hand stud thread 2a stud thread thread class
1. | 11FM5H0369-4811F | Cage 10613 |
2. | 99K4B-U PIECE 159B | Cage 10613 |
3. | HYD4Q-209 | Cage 10613 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.