Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 04-20950 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
29.2 mm stud thread and 30.8 mm stud thread
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
29.2 mm and 30.8 mm
The national stock number or the identification information of the end equipment for which the item is a part.
6115-01-567-7329 generator set, diesel engine
A designation that is used for the purpose of general identification of the thread.
6.0 mm stud thread
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.00 stud thread
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
stud, M6 x 1 x 30 long
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm B209 assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m stud thread
Answers.
M stud thread
Steel
29.2 millimeters minimum stud thread and 30.8 millimeters maximum stud thread
Right-hand stud thread
FSC 5307 ⁓ Studs
NSN 5307-01-587-8555 STUD,PLAIN
Used on 6115-01-567-7329 generator set, diesel engine. m stud thread thread series stud, M6 x 1 x 30 long 29.2mm overall length 29.2mm stud thread thread length right-hand stud thread
- NIIN
- 015878555
- NIIN Date
- 08/23/10
- Schedule B
- Name Code
- 15948
- FIIG
- A051A0
- QUP
- Historical Price
- $0.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | A028W649 | Cage 44940 |
Major End Users Countries and entities
- - Department of The Army
- - U.s. Marine Corps
Availability for 04-20950 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
04-20950 / Stud,plainWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.
