Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. TLC881-5-16E specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.474in. and 1.499in. ⁓1-1/2"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.3519in. and 0.3690in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, tapered, threaded
Head Major Diameter
0.528in. and 0.582in.
Tip Diameter
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.305in. and 0.310in.
Grip Length
A measurement of the longest dimension of the grip,in distinction from width.
A measurement of the longest dimension of the grip,in distinction from width.
0.990in. and 1.005in.
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.
A designation that is used for the purpose of general identification of the thread.
0.312in. ⁓5/16"
Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
BOLT-TAPER-Lok shank, shear
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
What quantity is this sold in?
1EA
What class is the thread series?
Unjf
What is the thread quantity per inch?
24
What is the grip length?
0.990 inches minimum and 1.005 inches maximum
What is the head style?
Err-090
What is the thread direction?
Right-hand
What is the thread class?
3a
What's the federal classification of TLC881-5-16E?
FSC 5320 ⁓ Rivets
NSN 5320-01-509-4753 PIN-RIVET
unjf thread series bolt-taper-lok shank, shear 24 thread quantity per inch 0.990" grip length right-hand 3a thread class
- NIIN
- 015094753
- NIIN Date
- 06/24/03
- Schedule B
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $135.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for TLC881-5-16E A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
TLC881-5-16E / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
