Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ST3M809D4-10 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.050in. and 1.070in. ⁓1-5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.280in. and 0.281in.
The national stock number or the identification information of the end equipment for which the item is a part.
F-18 aircraft
A measurement of the longest dimension of the grip,in distinction from width.
0.625in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
100 degree countersunk head, hex point drive, 0.0312 oversize, cres (125 ksi fsu)
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-13
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5629 assn std single material response
Answers.
1EA
Steel comp xm-13
0.625 inches
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-553-5208 PIN-RIVET
Used on f-18 aircraft. 100 degree countersunk head, hex point drive, 0.0312 oversize, cres (125 ksi fsu) 0.625" grip length
- NIIN
- 015535208
- NIIN Date
- 07/18/07
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- 1 X 1 X 1
- QUP
- 1
- Historical Price
- $169.98 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HLT831TB-8-10 | Cage 06725 |
| 2. | HLT831TB-8-10 | Cage 0ZC92 |
| 3. | HP4809D4-10 | Cage 0ZC92 |
| 4. | HLT831DL-8-10 | Cage 56878 |
| 5. | HLT831TB-8-10 | Cage 60516 |
| 6. | HLT831DL-8-10 | Cage 73197 |
| 7. | HLT831DL-8-10 | Cage 92215 |
| 8. | HLT831DL-8-10 | Cage L4528 |
| 9. | HLT831DL-8-10 | Cage 0PTK6 |
| 10. | 10197489 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Finland
Availability for ST3M809D4-10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
ST3M809D4-10 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
