Used on f/a-18e/f acft. 3a thread class right-hand flush countersunk head style 0.313" grip length pin rivet, fluted threads, tension, 100 c sunk, hex point drive unjf thread series
Used on skin acft door;f/a-18e/f aircraft. 3a thread class right-hand flush countersunk head style 0.375" grip length pin rivet, fluted threads, tension, 100 c sunk, hex point drive unjf thread series
3a thread class flush countersunk head style 1.6875" grip length 32 thread quantity per inch 9500 single pounds per square inch shear strength point drive bolt, shear 100 deg flush head 6al-4v titanium alloy 1/16 grip variation applications nha pn HL921 unjf thread series
3a thread class right-hand flush countersunk head style 0.562" grip length 28 thread quantity per inch 11800 double pounds per square inch shear strength cadmium surface treated unjf thread series
Used on tactical vehicles. 3a thread class right-hand flush countersunk head style 0.188" grip length 32 thread quantity per inch pin-rivet, 100 degree flush shear head, cres, 10n vapor disposition coated 2coating detail, ivd disposition per mil-c-83488 type 2 except thickness .0003 when measured per mil-std-1312, tes 12, apra 4.1'cetyl alcohal lube per hi-shear SPEC305; shank diameter .188 min unjf thread series
Used on tactical vehicles. 3a thread class right-hand 0.563" grip length 32 thread quantity per inch 1760 double pounds per square inch shear strength pin-rivet threaded, protruding head, hex point drive tension pounds 949; heat treat age to T6 condition per mil-h-6088; finish dye natural; dimentions after finish; surface texture per ansi B46.1 anodize surface treated unjc thread series
flush countersunk head style 0.189" grip length 5380 double pounds per square inch shear strength pin-rivet grooved, titanium composite aplications, 130 degree flush head, stump type psurface tecture ra per ansi/asme B46.1; bearing surface, head to shank radius,
flush countersunk head style 0.251" grip length 5380 double pounds per square inch shear strength pin-rivet grooved, titanium composite aplications, 130 degree flush head, stump type psurface tecture ra per ansi/asme B46.1; bearing surface, head to shank radius,
Used on f18 e/f. 3a thread class right-hand flush countersunk head style 0.245" grip length 28 thread quantity per inch pin, rivet, threaded-tension, 100 degree c'sunk head, hex point drive head marking per nas 1347, type ii unjf thread series
Used on f-18 hornet. flush countersunk head style 0.750" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.375" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.500" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.313" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.500" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.563" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f15 acft; aircraft, eagle f-15. 3a thread class right-hand flush countersunk head style 0.932" grip length 32 thread quantity per inch unjf thread series
Used on f15 acft; aircraft, eagle f-15. 3a thread class right-hand flush countersunk head style 0.932" grip length 24 thread quantity per inch unjf thread series
Used on f15 acft; aircraft, eagle f-15. 3a thread class right-hand flush countersunk head style 0.932" grip length 32 thread quantity per inch unjf thread series
Used on f15 acft; aircraft, eagle f-15. 3a thread class right-hand flush countersunk head style 0.932" grip length 32 thread quantity per inch unjf thread series
Used on f15 acft; aircraft, eagle f-15. 3a thread class right-hand flush countersunk head style 0.932" grip length 32 thread quantity per inch unjf thread series
Used on f-18 hornet. flush countersunk head style 0.250" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on f-18 hornet. flush countersunk head style 0.375" grip length pin, rivet, frooved, 100 deg c sunk head, shear, lockbolt, stump type, titanium, 95 ksi tprocurement specification nas 621; radius to be tangent to shank at 18.5 degree angle; dimentions before lubrication; locking grooves to be ground or rolled at manufactureres option; conical surface of head to shank within .003 tir
Used on c-17 aircraft. 3a thread class right-hand 0.495" grip length 32 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series
Used on c-17 aircraft. 3a thread class right-hand 0.620" grip length 28 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series
Used on C-17A. 3a thread class right-hand 0.245" grip length 28 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series
Used on c-17 aircraft. 3a thread class right-hand 0.4325" grip length 28 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series
Used on c-17 aircraft. 3a thread class right-hand 0.245" grip length 28 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series
Used on c17 aircraft. 3a thread class right-hand 0.4325" grip length 28 thread quantity per inch pin-rivet, threaded aluminum surface treated unjf thread series