Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3M1245V4L5A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.663in. ⁓43/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
0.132in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.249in. and 0.250in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.497in. and 0.506in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol and dry film
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18E/f acft
A measurement of the longest dimension of the grip,in distinction from width.
0.313in.
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pin rivet, fluted threads, tension, 100 c sunk, hex point drive
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Titanium alloy
0.313 inches
Flush countersunk
Right-hand
3a
Schedule B number: 8108908000
nmfc 095190
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-475-9635 PIN-RIVET
Used on f/a-18e/f acft. unjf thread series pin rivet, fluted threads, tension, 100 c sunk, hex point drive 0.313" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 014759635
- NIIN Date
- 06/20/00
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $12.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | EL3201NF8-5A | Cage 06950 |
| 2. | WC1245V8L5 | Cage 60516 |
Major End Users Countries and entities
- - Department of The Navy
- - Australia
Availability for 3M1245V4L5A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
3M1245V4L5A / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
