Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS2208V02 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.456in. ⁓15/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.098in. and 0.113in. ⁓1/8"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.250in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
stump
0.396in. and 0.411in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18E/f hornet aircraft
A measurement of the longest dimension of the grip,in distinction from width.
0.095in. and 0.156in.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
BOLT-Lock, protruding head, stump type, titanium alloy
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
four locking grooves; end may be cupped or flat; clorine cetyl alcohol lub
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The document designator of the specification or standard which established the item of supply.
80205-NAS2208 professional/industrial association standard
Answers.
1EA
Titanium alloy uns r56400
0.095 inches minimum and 0.156 inches maximum
Err-090
Schedule B number: 8108908000
nmfc 106510
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-483-6070 PIN-RIVET
Used on f/a-18e/f hornet aircraft. four locking grooves; end may be cupped or flat; clorine cetyl alcohol lub bolt-lock, protruding head, stump type, titanium alloy 0.095" grip length
- NIIN
- 014836070
- NIIN Date
- 04/03/01
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- 1
- Historical Price
- $3.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for NAS2208V02 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS2208V02 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
