Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1724-7-15 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.381in. and 1.406in. ⁓1-13/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.4726in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, tapered, threaded
0.711in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.4571in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol
A measurement of the longest dimension of the grip,in distinction from width.
0.927in. and 0.942in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.438in. ⁓29/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
108000 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 or steel comp E4340
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec 1st material response or MIL-S-5000 mil spec 2nd material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 2, cl 2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
80205-NAS1724 professional/industrial association standard
Answers.
Unjf
Steel comp 8740 or steel comp e4340
108000 single pounds per square inch
20
0.927 inches minimum and 0.942 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-320-3580 PIN-RIVET
unjf thread series cadmium surface treated 108000 single pounds per square inch shear strength 20 thread quantity per inch 0.927" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 013203580
- NIIN Date
- 05/23/90
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | TL100-7-15 | Cage 92215 |
| 2. | TL100-7-15 | Cage 17446 |
| 3. | TL100-7-15 | Cage 59563 |
| 4. | TL100-7-15 | Cage 27624 |
| 5. | TL100-7-15 | Cage F4745 |
| 6. | TL100-7-15 | Cage 97928 |
Major End Users Countries and entities
- - France
Availability for NAS1724-7-15 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1724-7-15 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
