Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1556-13 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.128in. and 1.148in. ⁓1-5/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.078in. and 0.088in. ⁓3/32"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.188in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
stump
0.302in. and 0.317in.
A measurement of the longest dimension of the grip,in distinction from width.
0.782in. and 0.844in.
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
T-6 solution heat treated
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 7075
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec single treatment response
The document designator of the specification or standard which established the item of supply.
80205-NAS1556 professional/industrial association standard
Answers.
Aluminum alloy 7075
0.782 inches minimum and 0.844 inches maximum
Err-090
Schedule B number: 7616103000
nmfc 013120
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-00-480-6186 PIN-RIVET
anodize surface treated 0.782" grip length
- NIIN
- 004806186
- NIIN Date
- 09/11/70
- Schedule B
- 7616103000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $2.95 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Germany
Availability for NAS1556-13 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 100.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 013120 ALUMINUM ARTICLE NOI SUB 6
- UFC (universal freight code)
- 05380
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1556-13 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
