Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. LSCP580137 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
6.250in. ⁓6-1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.750in. ⁓3/4"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
1.250in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
grooved
2.000in.
The national stock number or the identification information of the end equipment for which the item is a part.
M-1 abrams tank
A measurement of the longest dimension of the grip,in distinction from width.
4.500in. and 4.502in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
40.0 rockwell c and 47.0 rockwell c
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pin, hab part
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
remove all burrs and sharp edges; heat treatment precipitation harden to condition H900; protective finish 5.4.1 plus 30.7 of MIL-STD-171 .0002-.0005in. thick; head has thru hole centered with 0.141 diameter 0.37in. from top of head; grooved end has thru hole 0.470 in. diameter
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTMA564 assn std single material response or AMS5643 assn std single material response
Answers.
1EA
Steel comp 630
4.500 inches minimum and 4.502 inches maximum
Err-090
Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-472-9243 PIN-RIVET
Used on m-1 abrams tank. remove all burrs pin, hab part 4.500" grip length
- NIIN
- 014729243
- NIIN Date
- 03/22/00
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,073.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for LSCP580137 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
LSCP580137 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
