LS35270S05-26

LS35270S0526 Pin-rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. LS35270S05-26 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.077in. and 1.097in. ⁓1-7/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Width Between Flats

0.0635in. and 0.0645in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.1625in. and 0.1635in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.2612in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

C-5B aircraft

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.813in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.164in. ⁓11/64"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

108000 single pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5000 mil spec 1st material response or MIL-S-6049 mil spec 2nd material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium and chromate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 2, cl 2 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjc

Answers.

What class is the thread series?

Unjc

What material is the pin-rivet made of ?

Steel comp e4340 or steel comp 8740

What is the shear strength?

108000 single pounds per square inch

What is the thread quantity per inch?

32

What is the grip length?

0.813 inches maximum

What is the head style?

Err-090

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for LS35270S05-26?

5320-01-325-0400

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel

What's the federal classification of LS35270S05-26?

FSC 5320 ⁓ Rivets

NSN 5320-01-325-0400 PIN-RIVET

Used on c-5b aircraft. unjc thread series cadmium surface treated 108000 single pounds per square inch shear strength 32 thread quantity per inch 0.813" grip length right-hand 3a thread class

NIIN
013250400
NIIN Date
08/27/90
Schedule B
7318230000 
Name Code
67165
FIIG
A528U0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$90.25 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for LS35270S05-26 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096320 RIVETS I/S NICKEL PLATED BUFFED 
UFC (universal freight code)
50430 

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

LS35270S05-26 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.