Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ITR10-225SD specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.625in. ⁓5/8"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.296in.
0.400in.
The national stock number or the identification information of the end equipment for which the item is a part.
striker, XM707
A measurement of the longest dimension of the grip,in distinction from width.
0.300in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
vmaterial thickness (grip range) 0.130-0.225; install hole size 0.297-0.303; install drill size 0.297; large head and ribbed shank; wide grip range; upset load (lbs) 1275-1460; TORQUE-Out (INCH-Pounds) 100-115; PULL-Out (pounds) 1165-1700
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1008 or steel comp 1010
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
ASTMB633Fe/ZN8TYPE2 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
1EA
Unc
Steel comp 1008 or steel comp 1010
32
0.300 inches maximum
Right-hand
2b
FSC 5320 ⁓ Rivets
NSN 5320-01-467-4333 PIN-RIVET
Used on striker,xm707. unc thread series zinc surface treated vmaterial thickness (grip range) 0.130-0.225; install hole size 0.297-0.303; install drill size 0.297; large head 32 thread quantity per inch 0.300" grip length right-hand 2b thread class
- NIIN
- 014674333
- NIIN Date
- 08/30/99
- Schedule B
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $0.35 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for ITR10-225SD A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
ITR10-225SD / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
