HSTM12AZ08-31

HSTM12AZ0831 Pin-rivet
Home » Catalog » Fasteners (p. 722) » Pin-rivets (p. 48) » Part Number HSTM12AZ08-31

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HSTM12AZ08-31 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

39.0 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

countersunk w/reverse chamfer

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

1.3 mm

Width Between Flats

3.1 mm and 3.6 mm

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

6.0 mm

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

5.965 mm and 5.990 mm

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

future lynx helicopter

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

31.0 mm

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

22200 pounds per square inch

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

6.0 mm

Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.

1.00

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

37000 double pounds per square inch

Countersink Angle
The included angle of the countersink.

45.0 degrees

Thread Tolerance Class
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.

4h external

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS4928 assn std single material response or AMS5967 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

spec 294 mfr ref single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

iso m

Answers.

What class is the thread series?

Iso m

What material is the pin-rivet made of ?

Titanium alloy uns r56400

What is the shear strength?

37000 double pounds per square inch

What is the grip length?

31.0 millimeters maximum

What is the head style?

Countersunk w/reverse chamfer

What is the thread direction?

Right-hand

What is the NSN for HSTM12AZ08-31?

5320-01-581-9325

How is this classified for shipping?

Schedule B number: 8108908000
Other wrought titanium

What's the federal classification of HSTM12AZ08-31?

FSC 5320 ⁓ Rivets

NSN 5320-01-581-9325 PIN-RIVET

Used on future lynx helicopter. iso m thread series aluminum surface treated 37000 double pounds per square inch shear strength 31.0mm grip length countersunk w/reverse chamfer head style right-hand

NIIN
015819325
NIIN Date
02/02/10
Schedule B
8108908000 
Name Code
67165
FIIG
A528U0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Republic of Korea 
  • - United Kingdom 

Availability for HSTM12AZ08-31 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HSTM12AZ08-31 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.