HST529AP-10-20

HST529AP1020 Pin-rivet

Home » Catalog » Fasteners (p. 1927) » Pin-rivets (p. 149) » Part Number HST529AP-10-20

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. HST529AP-10-20 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.740in. and 1.760in. ⁓1-49/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.010in. and 0.015in. ⁓1/64"

Width Between Flats

0.160in. and 0.180in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.3115in. and 0.3120in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.5569in. and 0.5619in.

Head Minor Diameter

0.542in. and 0.555in.

Countersink Height

0.1127in. and 0.1198in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

C-17

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

1.245in. and 1.255in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.3125in. ⁓21/64"

Countersink Angle
The included angle of the countersink.

100.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 4967 assn std single material response or ams 4928 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

aluminum

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-L-87132 mil spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the pin-rivet made of ?

Titanium alloy

What is the thread quantity per inch?

What is the grip length?

1.245 inches minimum and 1.255 inches maximum

What is the head style?

Err-090

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for HST529AP-10-20?

5320-01-458-0519

How is this classified for shipping?

Schedule B number: 8108908000
Other wrought titanium

What's the federal classification of HST529AP-10-20?

FSC 5320 ⁓ Rivets

NSN 5320-01-458-0519 PIN-RIVET

Used on C-17. unjf thread series aluminum surface treated 24 thread quantity per inch 1.245" grip length right-hand 3a thread class

NIIN: 014580519
NIIN Date: 08/12/98
Schedule B: 8108908000
Name Code: 67165
FIIG: A528U0
QUP
Historical Price: $36.65 EA
DEMIL / ITAR: Uncontrolled item (Code A)
Hazmat: No hazard information available from HMIRS.
MSDS: N/A
Precious Metals: No precious metals
Enviromental: N/A
Electrostatic ESD & EMI: No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1.	HK0097C10-20	Cage 17446
2.	FIT953C10-20	Cage 58998
3.	WC197A-10-20	Cage 60516
4.	VS3427VAP10-20	Cage 92215
5.	3D0097C10-20	Cage 88277
6.	VS3427VAP10-20	Cage 06950

Major End Users Countries and entities

- Department of The Air Force

Availability for HST529AP-10-20 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HST529AP-10-20 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.