HS4415-2B-6

HS44152B6 Pin-rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HS4415-2B-6 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.690in. and 0.710in. ⁓23/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush countersunk

Width Between Flats

0.104in. and 0.119in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.181in. and 0.184in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.3765in. and 0.3813in.

Expansion Device
The device by which the item is expanded and set.

threaded stem

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

1520-01-8250; helicopter, attack

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.375in.

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.190in. ⁓13/64"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

5380 double pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303 collar

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E4340 body or steel comp 4140 body or steel comp 8740 body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A582 assn std single material response collar

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5000 mil spec single material response body or MIL-S-5626 mil spec single material response body or MIL-S-6049 mil spec single material response body

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium body

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 fed spec single treatment response body

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the pin-rivet made of ?

Steel comp e4340 body or steel comp 4140 body or steel comp 8740 body

What material is the pin-rivet made of ?

Steel comp 303 collar

What is the shear strength?

5380 double pounds per square inch

What is the grip length?

0.375 inches maximum

What is the head style?

Flush countersunk

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for HS4415-2B-6?

5320-01-479-1476

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel

What's the federal classification of HS4415-2B-6?

FSC 5320 ⁓ Rivets

NSN 5320-01-479-1476 PIN-RIVET

Used on 1520-01-8250; helicopter,attack. unjf thread series cadmium body surface treated 5380 double pounds per square inch shear strength 0.375" grip length flush countersunk head style right-hand 3a thread class

NIIN
014791476
NIIN Date
10/12/00
Schedule B
7318230000 
Name Code
67165
FIIG
A528U0
QUP
 
Historical Price
$34.10 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. HL21PB86K6-6 Cage 56878
2. HL21PB86K6-6 Cage 73197
3. HL21PB86K6-6 Cage 92215

Major End Users Countries and entities

  • - Department of The Army 

Availability for HS4415-2B-6 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
106510 RIVETS I/S PLAIN/GALVANIZED ETC 
UFC (universal freight code)
54760 

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HS4415-2B-6 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.