Serving our customers with quality and safety first.
3a
RIGHT-Hand
1.113in. and 1.133in. ⁓1-9/64"
0.103in. and 0.115in. ⁓1/8"
0.2207in. and 0.2242in.
0.4990in. and 0.4995in.
PIN-Rivet, straight, threaded
0.735in. and 0.770in.
solid film and cetyl alcohol, spec 305, HI-Shear corp
0.433in. and 0.443in.
20000 pounds per square inch
0.500in. ⁓1/2"
49100 double pounds per square inch
white paint on top of head.
steel comp XM-13
AMS5629 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
73197-HLT50 manufacturers standard
1EA
Unjf
Steel comp xm-13
49100 double pounds per square inch
0.433 inches minimum and 0.443 inches maximum
Err-090
Right-hand
3a
Schedule B number: 7318230000
nmfc 096320
Rivets of iron or steel
FSC 5320 ⁓ Rivets
unjf thread series passivate surface treated white paint on top of head. 49100 double pounds per square inch shear strength 0.433" grip length right-hand 3a thread class
1. | HLT50YB-16-7 | Cage 17446 |
2. | HLT50YC-16-7 | Cage 17446 |
3. | HLT50YC-16-7 | Cage 73197 |
4. | HLT50YC-16-7 | Cage L4528 |
5. | HLT50YB-16-7 | Cage 73197 |
6. | HLT50YB-16-7 | Cage L4528 |
7. | ST3M759C8-7 | Cage 76301 |
8. | HLT50YB-16-7 | Cage 06725 |
9. | HLT50YC-16-7 | Cage 06725 |
10. | HLT50YB-16-7 | Cage 06950 |
11. | HLT50YB-16-7 | Cage 56878 |
12. | HLT50YC-16-7 | Cage 56878 |
13. | ST3M759C8-7 | Cage 58998 |
14. | HLT50YB-16-7 | Cage 60516 |
15. | HLT50YC-16-7 | Cage 60516 |
16. | ST3M759C8-7 | Cage 60516 |
17. | HLT50YB-16-7 | Cage 80539 |
18. | HLT50YC-16-7 | Cage 80539 |
19. | HLT50YB-16-7 | Cage 92215 |
20. | HLT50YC-16-7 | Cage 92215 |
21. | HLT50YC-16-7 | Cage K5673 |
22. | HLT50YB-16-7 | Cage K5673 |
23. | HLT50YB-16-7 | Cage 97928 |
24. | AIC-L-759C8-7 | Cage 06725 |
25. | MA4759C8-7 | Cage 58845 |
Nothing similar to this part number was found in our inventory
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.