Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HLT953DL-8-10 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.010in. and 1.030in. ⁓1-1/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
0.0947in. and 0.0967in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2490in. and 0.2495in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.470in. and 0.477in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
solid film and cetyl alcohol
The national stock number or the identification information of the end equipment for which the item is a part.
F18 e/f
A measurement of the longest dimension of the grip,in distinction from width.
0.620in. and 0.630in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A designation that is used for the purpose of general identification of the thread.
0.2500in. ⁓1/4"
The included angle of the countersink.
100.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pin, rivet, THREADED-Tension, 100 degree c'sunk head, hex point drive
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
head marking per NAS1347, type ii
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS4928 assn std 1st material response or AMS4967 assn std 2nd material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
ST3-760 manufacturers standard
Answers.
Unjf
Titanium alloy uns r56400
28
0.620 inches minimum and 0.630 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 8108908000
nmfc 095190
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-469-2638 PIN-RIVET
Used on f18 e/f. unjf thread series head marking per NAS1347, type ii pin, rivet, threaded-tension, 100 degree c'sunk head, hex point drive 28 thread quantity per inch 0.620" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 014692638
- NIIN Date
- 11/09/99
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $12.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HLT953TB-8-10 | Cage 06725 |
| 2. | HLT953TB-8-10 | Cage 17446 |
| 3. | HLT953TB-8-10 | Cage 60516 |
| 4. | HLT953TB-8-10 | Cage 56878 |
| 5. | ST3M760T4-10 | Cage 76301 |
| 6. | HLT953TB-8-10 | Cage 73197 |
| 7. | HLT953TB-8-10 | Cage 92215 |
| 8. | HLT953TB-8-10 | Cage L4528 |
| 9. | HLT953TB-8-10 | Cage 97928 |
| 10. | HLT953TB-8-10 | Cage K5673 |
| 11. | HLT953TB-8-10 | Cage 0PTK6 |
| 12. | HP4760T4-10 | Cage 0ZC92 |
| 13. | ST3M760T4-10 | Cage 58998 |
| 14. | HLT953TB-8-10 | Cage 80539 |
Major End Users Countries and entities
- - Department of The Navy
- - Australia
Availability for HLT953DL-8-10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI SUB 9
- UFC (universal freight code)
- 49790
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HLT953DL-8-10 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
