Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HLT52YB-8-14 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.260in. and 1.280in. ⁓1-9/32"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.080in. and 0.090in. ⁓3/32"
Width Between Flats
0.0947in. and 0.0967in.
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2490in. and 0.2495in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
Head Major Diameter
0.415in. and 0.440in.
Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.
A substance designed to provide a reduction of friction between the two surfaces in contact.
solid film
Grip Length
A measurement of the longest dimension of the grip,in distinction from width.
A measurement of the longest dimension of the grip,in distinction from width.
0.880in.
Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
125000 single pounds per square inch
Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
white paint on head
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-13
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5629 assn std single material response
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
When was the most recent contract awarded?
On 07/10/2013 under contract SPM5E913M2397 for qty 100
What class is the thread series?
Unjf
What material is the pin-rivet made of ?
Steel comp xm-13
What is the shear strength?
125000 single pounds per square inch
What is the thread quantity per inch?
28
What is the grip length?
0.880 inches maximum
What is the head style?
Err-090
What is the thread direction?
Right-hand
What is the thread class?
3a
How is this classified for shipping?
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
What's the federal classification of HLT52YB-8-14?
FSC 5320 ⁓ Rivets
NSN 5320-01-197-6645 PIN-RIVET
unjf thread series passivate surface treated white paint on head 125000 single pounds per square inch shear strength 28 thread quantity per inch 0.880" grip length right-hand 3a thread class
- NIIN
- 011976645
- NIIN Date
- 12/24/84
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- Historical Price
- $3.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HLT52YC-8-14 | Cage 73197 |
| 2. | HLT52YC-8-14 | Cage 60516 |
| 3. | HLT52YC-8-14 | Cage 56878 |
| 4. | HLT52YC-8-14 | Cage 92215 |
| 5. | ST3M761C4-14 | Cage 76301 |
| 6. | HLT52TB-8-14 | Cage 06950 |
| 7. | HLT52YC-8-14 | Cage 06950 |
| 8. | HLT52YC-8-14 | Cage 17446 |
| 9. | HLT52YC-8-14 | Cage 06725 |
| 10. | HP4761-4-14 | Cage 0ZC92 |
| 11. | HLT52YC-8-14 | Cage 97928 |
| 12. | 10112124 | Cage A486G |
| 13. | AIC-L-761C4-14 | Cage 06725 |
| 14. | MA4761-4-14 | Cage 58845 |
| 15. | HLT52YC-8-14 | Cage 73197 |
| 16. | HLT52YC-8-14 | Cage 06725 |
| 17. | HP4761-4-14 | Cage 0ZC92 |
| 18. | ST3M761C4-14 | Cage 76301 |
| 19. | HLT52YC-8-14 | Cage 56878 |
| 20. | HLT52YC-8-14 | Cage 60516 |
| 21. | HLT52YC-8-14 | Cage 92215 |
| 22. | HLT52YC-8-14 | Cage 06950 |
| 23. | HLT52TB-8-14 | Cage 06950 |
| 24. | HLT52YC-8-14 | Cage 17446 |
| 25. | HLT52YC-8-14 | Cage 97928 |
| 26. | AIC-L-761C4-14 | Cage 06725 |
| 27. | MA4761-4-14 | Cage 58845 |
| 28. | 10112124 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Finland
- - Spain
- - Malaysia
- - Australia
Availability for HLT52YB-8-14 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HLT52YB-8-14 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
