HLT311TA-6-15

HLT311TA615 Pin-rivet
Home » Catalog » Fasteners (p. 3860) » Pin-rivets (p. 355) » Part Number HLT311TA-6-15

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HLT311TA-6-15 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.240in. and 1.260in. ⁓1-17/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Width Between Flats

0.791in. and 0.806in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.1890in. and 0.1895in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.2966in. and 0.3016in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

solid film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.928in. and 0.948in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.190in. ⁓13/64"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

4010 double pounds per square inch

Countersink Angle
The included angle of the countersink.

37.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

hi kote 2 solid film lube per HI-Shear spec. 292 and cetyl alcohol lube per HI-Shear spec 305

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 4828 assn std single material response or ams 4967 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

TI-Shield iii mfr ref all treatment responses

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

73197-HLT311TA-8-18 manufacturers standard

Answers.

What class is the thread series?

Unjf

What material is the pin-rivet made of ?

Titanium alloy uns r56400

What is the shear strength?

4010 double pounds per square inch

What is the thread quantity per inch?

32

What is the grip length?

0.928 inches minimum and 0.948 inches maximum

What is the head style?

Err-090

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for HLT311TA-6-15?

5320-01-200-8528

How is this classified for shipping?

Schedule B number: 8108908000
Other wrought titanium

What's the federal classification of HLT311TA-6-15?

FSC 5320 ⁓ Rivets

NSN 5320-01-200-8528 PIN-RIVET

unjf thread series anodize surface treated hi kote 2 solid film lube per hi-shear spec. 292 4010 double pounds per square inch shear strength 32 thread quantity per inch 0.928" grip length right-hand 3a thread class

NIIN
012008528
NIIN Date
02/10/85
Schedule B
8108908000 
Name Code
67165
FIIG
A528U0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Australia 
  • - Canada 

Availability for HLT311TA-6-15 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HLT311TA-6-15 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.