Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HLT109AP-14-8 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.180in. and 1.200in. ⁓1-13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
0.190in. and 0.193in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.451in. and 0.453in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.662in. and 0.668in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol, spec 305, HI-Shear corp
A measurement of the longest dimension of the grip,in distinction from width.
0.495in. and 0.510in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
A designation that is used for the purpose of general identification of the thread.
0.438in. ⁓29/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
30600 double pounds per square inch
The included angle of the countersink.
100.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS4928 assn std 1st material response or AMS4967 assn std 2nd material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
73197-HLT109 manufacturers standard
Answers.
Unjf
Titanium alloy uns r56400
30600 double pounds per square inch
20
0.495 inches minimum and 0.510 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 8108908000
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-284-8684 PIN-RIVET
unjf thread series 30600 double pounds per square inch shear strength 20 thread quantity per inch 0.495" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 012848684
- NIIN Date
- 09/02/88
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - United Kingdom
Availability for HLT109AP-14-8 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HLT109AP-14-8 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
