HLM611-06-33

HLM6110633 Pin-rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HLM611-06-33 specification

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

44.7 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush countersunk

Width Between Flats

2.4 mm and 2.5 mm

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

6.97 mm and 6.99 mm

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

10.5 mm and 10.6 mm

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

tornado, mlu, repair and overhaul, bae systems

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

33.0 mm

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

7.0 mm

Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.

1.00

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

50400 double newtons per square millimeter

Countersink Angle
The included angle of the countersink.

100.0 degrees

Thread Tolerance Class
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.

4h external

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 4928 assn std 1st material response or ams 4971 assn std 2nd material response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

iso m

Answers.

What class is the thread series?

Iso m

What material is the pin-rivet made of ?

Titanium alloy

What is the shear strength?

50400 double newtons per square millimeter

What is the grip length?

33.0 millimeters

What is the head style?

Flush countersunk

What is the thread direction?

Right-hand

What is the NSN for HLM611-06-33?

5320-01-500-7789

How is this classified for shipping?

Schedule B number: 8108908000
Other wrought titanium

What's the federal classification of HLM611-06-33?

FSC 5320 ⁓ Rivets

NSN 5320-01-500-7789 PIN-RIVET

Used on tornado, mlu, repair and overhaul, bae systems. iso m thread series 50400 double newtons per square millimeter shear strength 33.0mm grip length flush countersunk head style right-hand

NIIN
015007789
NIIN Date
09/10/02
Schedule B
8108908000 
Name Code
67165
FIIG
A528U0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Germany 

Availability for HLM611-06-33 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HLM611-06-33 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.