HL64PB87-5-4

HL64PB8754 Pin-rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HL64PB87-5-4 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.552in. and 0.572in. ⁓37/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.055in. and 0.060in. ⁓1/16"

Width Between Flats

0.079in. and 0.080in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.162in. and 0.164in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.306in. and 0.322in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol, spec 305, HI-Shear corp

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.245in. and 0.255in.

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

washer

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.164in. ⁓11/64"

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

oversize replacement HL64PB87-5-4Used HL20PB86-5-4 or HL420PB86-5-4

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303se collar

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 bolt or steel comp 4340 bolt or steel comp 8740 bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ASTMA-554 national spec single material response washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ASTMA-582 national spec single material response collar

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response bolt or MIL-S-5000 mil spec 2nd material response bolt or MIL-S-6049 mil spec 3rd material response bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 2 fed spec single treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 3 fed spec single treatment response collar

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 3 fed spec single treatment response washer

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjc

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

73197-HL20 manufacturers standard and 73197-HL86 manufacturers standard and 73197-HL64 manufacturers standard and 73197-HL87 manufacturers standard

Answers.

What class is the thread series?

Unjc

What material is the pin-rivet made of ?

Steel comp 4140 bolt or steel comp 4340 bolt or steel comp 8740 bolt

What material is the pin-rivet made of ?

Steel comp 303se collar

What material is the pin-rivet made of ?

Steel comp 302 washer

What is the grip length?

0.245 inches minimum and 0.255 inches maximum

What is the head style?

Err-090

What is the thread class?

3a

What is the NSN for HL64PB87-5-4?

5320-01-185-6308

What's the federal classification of HL64PB87-5-4?

FSC 5320 ⁓ Rivets

NSN 5320-01-185-6308 PIN-RIVET

unjc thread series cadmium surface treated oversize replacement HL64PB87-5-4used HL20PB86-5-4 or HL420PB86-5-4 0.245" grip length 3a thread class

NIIN
011856308
NIIN Date
08/01/84
Schedule B
 
Name Code
67165
FIIG
A528U0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$6.03 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. HL20PB86-5-4 Cage 73197
2. HL20PB86-5-4 Cage L4528
3. HL20PB86-5-4 Cage C4293
4. HL20PB86-5-4 Cage 56878
5. HL20PB86-5-4 Cage 06725
6. HL20PB86-5-4 Cage 06950
7. HL20PB86-5-4 Cage 17446
8. HL20PB86-5-4 Cage 60516
9. HL20PB86-5-4 Cage 92215
10. HL20PB86-5-4 Cage R1120
11. HL20PB86-5-4 Cage 97928

Major End Users Countries and entities

  • - Department of The Army 
  • - Department of The Navy 
  • - Department of The Air Force 
  • - Poland 
  • - Slovakia 
  • - Brazil 
  • - Australia 
  • - Germany 
  • - Denmark 

Availability for HL64PB87-5-4 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096320 RIVETS I/S NICKEL PLATED BUFFED 
UFC (universal freight code)
50430 

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HL64PB87-5-4 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.