Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL49-6-7 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.753in. and 0.773in. ⁓25/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
0.079in. and 0.081in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.1890in. and 0.1895in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.377in. and 0.381in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol
The national stock number or the identification information of the end equipment for which the item is a part.
w/s:gun system, 25mm; joint stars target radar system; aircraft (AC-130H, MC-130H, EC-130E, HC-130) ; aircraft, stratolifter C-135; aircraft, harrier AV-8B; aircraft, eagle F-15; aircraft, awacs, E-3A
A measurement of the longest dimension of the grip,in distinction from width.
0.438in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
160000 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
95000 single pounds per square inch
The included angle of the countersink.
100.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5737 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
258, fscm 73197 mfr ref single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Iron alloy 660
95000 single pounds per square inch
32
0.438 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 7318230000
nmfc 095190
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-00-292-6063 PIN-RIVET
Used on w/s:gun system, 25mm; joint stars target radar system; aircraft (ac-130h, mc-130h, ec-130e, hc-130); aircraft, stratolifter c-135; aircraft, harrier av-8b; aircraft, eagle f-15; aircraft, awacs, e-3a. unjf thread series passivate surface treated 95000 single pounds per square inch shear strength 32 thread quantity per inch 0.438" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 002926063
- NIIN Date
- 09/19/73
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $3.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | ST3M419C3-7 | Cage 76301 |
| 2. | MA4419-3-7 | Cage 58895 |
| 3. | AIC-L49-6-7 | Cage 06725 |
| 4. | BACB30FN6A7 | Cage 1RC86 |
| 5. | HL441UC-6-7 | Cage 73197 |
| 6. | BACB30FN6A7 | Cage 81205 |
| 7. | HL441UC-6-7 | Cage 06725 |
| 8. | HL441UC-6-7 | Cage 06950 |
| 9. | HL441UC-6-7 | Cage 17446 |
| 10. | HL441UC-6-7 | Cage 56878 |
| 11. | HL441UC-6-7 | Cage 60516 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Spain
- - Republic of Korea
- - Italy
- - Nato Maintenance And Supply Agency
Availability for HL49-6-7 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI SUB 9
- UFC (universal freight code)
- 49790
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL49-6-7 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
