Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL21PB75K5-10 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.937in. ⁓15/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.156in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.326in. and 0.330in.
The device by which the item is expanded and set.
threaded stem
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol, spec 305, HI-Shear corp
A measurement of the longest dimension of the grip,in distinction from width.
0.625in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
180000 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.190in. ⁓13/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
95000 single pounds per square inch
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
3no heat treatment o collar; washer age to H-1025 condition for 17-4Ph, age to TH1050 condition for 17-7Ph and 15-7 mo per MIL-H-6875; collar to be solid film lub per lubeco 905; CXCYGRIVET-Pin assembly threaded, 100 degree flush head, alloy steel
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 collar
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 washer or steel comp 631 washer or steel comp 632 washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E4340 body or steel comp 4140 body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5640 assn std single material response collar or ASTMA582 assn std single material response collar
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response washer or AMS5528 assn std single material response washer or AMS5520 assn std single material response washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5000 mil spec single material response body or MIL-S-5626 mil spec single material response body or MIL-S-6040 mil spec single material response body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, TYPE2 fed spec single treatment response body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 1, class 2 fed spec single treatment response washer
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Steel comp e4340 body or steel comp 4140 body
Steel comp 630 washer or steel comp 631 washer or steel comp 632 washer
Steel comp 303 collar
95000 single pounds per square inch
32
0.625 inches
Flush countersunk
Right-hand
3a
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-477-3487 PIN-RIVET
unjf thread series cadmium body surface treated 3no heat treatment o collar; washer age to h-1025 condition for 17-4ph, age to TH1050 condition for 17-7ph 95000 single pounds per square inch shear strength 32 thread quantity per inch 0.625" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 014773487
- NIIN Date
- 08/07/00
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- 1
- Historical Price
- $10.28 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HS4415-1A10 | Cage 8V613 |
Major End Users Countries and entities
- - Department of The Army
Availability for HL21PB75K5-10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL21PB75K5-10 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
