Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL20PB-14-9 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.1875in. and 1.2075in. ⁓1-7/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
straight pan
A measurement from the bottom to the top of the head,in distinction from depth.
0.150in. and 0.160in. ⁓11/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.4360in. and 0.4370in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
stump
0.592in. and 0.627in.
A measurement of the longest dimension of the chamfer,in distinction from width.
0.075in. and 0.085in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.233in. and 0.253in.
A measurement of the longest dimension of the grip,in distinction from width.
0.5525in. and 0.5725in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
18900 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.4375in. ⁓29/64"
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
HI-Lok pin protruding tensin head alloy steel 1/16 grip
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material:alloy steel
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel
20
0.5525 inches minimum and 0.5725 inches maximum
Straight pan
3a
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-603-8703 PIN-RIVET
unjf thread series material:alloy steel hi-lok pin protruding tensin head alloy steel 1/16 grip 20 thread quantity per inch 0.5525" grip length straight pan head style 3a thread class
- NIIN
- 016038703
- NIIN Date
- 03/20/12
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Australia
Availability for HL20PB-14-9 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL20PB-14-9 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
