HL208-8-11

HL208811 Pin-rivet
Home » Catalog » Fasteners (p. 1100) » Pin-rivets (p. 63) » Part Number HL208-8-11

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HL208-8-11 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.072in. and 1.092in. ⁓1-3/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

straight pan

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.059in. and 0.069in. ⁓5/64"

Width Between Flats

0.094in. and 0.096in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.248in. and 0.249in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.387in. and 0.412in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol, spec 305, HI-Shear corp

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

C-17A aircraft

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.682in. and 0.692in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.250in. ⁓1/4"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

95000 single pounds per square inch

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

PIN-Rivet

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 or steel comp 8740

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5626 mil spec 1st material response or MIL-S-6049 mil spec 2nd material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

305 cage 73197 mfr ref single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the pin-rivet made of ?

Steel comp 4140 or steel comp 8740

What is the shear strength?

95000 single pounds per square inch

What is the thread quantity per inch?

28

What is the grip length?

0.682 inches minimum and 0.692 inches maximum

What is the head style?

Straight pan

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for HL208-8-11?

5320-01-542-9867

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of HL208-8-11?

FSC 5320 ⁓ Rivets

NSN 5320-01-542-9867 PIN-RIVET

Used on c-17a aircraft. unjf thread series cadmium surface treated pin-rivet 95000 single pounds per square inch shear strength 28 thread quantity per inch 0.682" grip length straight pan head style right-hand 3a thread class

NIIN
015429867
NIIN Date
08/24/06
Schedule B
7318230000 
Name Code
67165
FIIG
A528U0
QUP
1 
Historical Price
$21.25 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 3D0174-8-11 Cage 88277
2. 3D0174-8-11 Cage 88277
3. 3D0174-8-11 Cage 88277

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for HL208-8-11 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HL208-8-11 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.