Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL2072-8-9 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.577in. and 0.590in. ⁓19/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk w/reverse chamfer
A measurement from the bottom to the top of the head,in distinction from depth.
0.077in. and 0.090in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, tapered, threaded
0.415in. and 0.440in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.241in. and 0.244in.
The device by which the item is expanded and set.
drive STEM-Type h
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol, spec 305, HI-Shear corp
A measurement of the longest dimension of the grip,in distinction from width.
0.500in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The included angle of the countersink.
100.0 degrees
The load applied perpendicularly to the longitudinal axis of an item at which point the item will fracture when subjected to the standard single or double shear test method.
9300 double any acceptable of standard range
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
major diameter: 0.2486 in. and 0.2495 in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303se collar
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS6415&JDBMIL-S-6526 assn std 1st material response body or MIL-S-6049 mil spec 1st material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTMA-582 assn std 2nd material response collar
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 1, CLASS2 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel comp 303se collar
Steel body
28
0.500 inches
Countersunk w/reverse chamfer
Right-hand
3a
Schedule B number: 7318230000
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-479-9178 PIN-RIVET
unjf thread series cadmium surface treated major diameter: 0.2486 in. 28 thread quantity per inch 0.500" grip length countersunk w/reverse chamfer head style right-hand 3a thread class
- NIIN
- 014799178
- NIIN Date
- 11/01/00
- Schedule B
- 7318230000
- Name Code
- 67165
- FIIG
- A528U0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Italy
Availability for HL2072-8-9 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL2072-8-9 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
