HL19PB70-8-4

HL19PB7084 Pin-rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. HL19PB70-8-4 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3b

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.240in. and 0.250in. ⁓1/4"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush countersunk

Width Between Flats

0.095in. and 0.097in.

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.245in. and 0.250in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

PIN-Rivet, straight, threaded

Head Major Diameter

0.281in. and 0.375in.

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.250in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.250in. ⁓1/4"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

9300 double pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

color code bronze

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

quenched washer

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

quenched bolt

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

T-6 solution heat treated collar

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2024 collar

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4140 bolt or steel comp 4340 bolt or steel comp 8740 bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5000 mil spec 1st material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-250/18 fed spec 1st material response washer or QQ-A-250/6 fed spec 2nd material response washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-430 fed spec 1st material response collar or QQ-A-225/6 fed spec 2nd material response collar

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize collar

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 1st treatment response collar

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 3rd treatment response washer

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 2, class 2 fed spec 1st treatment response bolt

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

73197-HL19PB70 manufacturers standard

Answers.

What class is the thread series?

Unjf

What material is the pin-rivet made of ?

Steel comp 4140 bolt or steel comp 4340 bolt or steel comp 8740 bolt

What material is the pin-rivet made of ?

Steel comp 301 washer

What material is the pin-rivet made of ?

Aluminum alloy 2024 collar

What is the shear strength?

9300 double pounds per square inch

What is the thread quantity per inch?

28

What is the grip length?

0.250 inches

What is the head style?

Flush countersunk

What is the thread direction?

Right-hand

What is the thread class?

3b

What is the NSN for HL19PB70-8-4?

5320-01-205-8026

What's the federal classification of HL19PB70-8-4?

FSC 5320 ⁓ Rivets

NSN 5320-01-205-8026 PIN-RIVET

unjf thread series cadmium bolt surface treated color code bronze 9300 double pounds per square inch shear strength 28 thread quantity per inch 0.250" grip length flush countersunk head style right-hand 3b thread class

NIIN
012058026
NIIN Date
04/11/85
Schedule B
 
Name Code
67165
FIIG
A528U0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Availability for HL19PB70-8-4 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other pin-rivets with similar characteristics

Nothing similar to this part number was found in our inventory

HL19PB70-8-4 / Pin-rivetWhat is the formal definition of this item?

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.