Serving our customers with quality and safety first.
3a
RIGHT-Hand
1.815in. and 1.835in. ⁓1-27/32"
0.064in. and 0.074in. ⁓5/64"
0.079in. and 0.080in.
0.188in. and 0.189in.
PIN-Rivet, straight, threaded
0.357in. and 0.377in.
cetyl alcohol, spec 305, HI-Shear corp
1.495in. and 1.505in.
3180 pounds per square inch
0.190in. ⁓13/64"
5380 double pounds per square inch
titanium alloy uns R56400
ams 4928 assn std single material response
aluminum
unjf
1HD
Unjf
Titanium alloy uns r56400
5380 double pounds per square inch
1.495 inches minimum and 1.505 inches maximum
Err-090
Right-hand
3a
Schedule B number: 8108908000
nmfc 096320
Other wrought titanium
FSC 5320 ⁓ Rivets
unjf thread series aluminum surface treated 5380 double pounds per square inch shear strength 1.495" grip length right-hand 3a thread class
1. | HL12VAP-6-24 | Cage 73197 |
2. | HL12VAP-6-24 | Cage L4528 |
3. | HL12VAP-6-24 | Cage 17446 |
4. | HL12VAP-6-24 | Cage 56878 |
5. | HL12VAP-6-24 | Cage 80539 |
6. | HL12VAP-6-24 | Cage 06725 |
7. | HL12VAP-6-24 | Cage 60516 |
8. | HL12VAP-6-24 | Cage 92215 |
9. | HL12VAP-6-24 | Cage 0PTK6 |
10. | HL12VAP-6-24 | Cage 97928 |
11. | HL12VAP-6-24 | Cage 97928 |
12. | HL12VAP-6-24 | Cage 73197 |
13. | HL12VAP-6-24 | Cage L4528 |
14. | HL12VAP-6-24 | Cage 06725 |
15. | HL12VAP-6-24 | Cage 60516 |
16. | HL12VAP-6-24 | Cage 92215 |
17. | HL12VAP-6-24 | Cage 17446 |
18. | HL12VAP-6-24 | Cage 56878 |
19. | HL12VAP-6-24 | Cage 80539 |
20. | HL12VAP-6-24 | Cage 0PTK6 |
21. | HL12VAP-6-24 | Cage 97928 |
22. | HL12VAP-6-24 | Cage 73197 |
23. | HL12VAP-6-24 | Cage L4528 |
24. | HL12VAP-6-24 | Cage 06725 |
25. | HL12VAP-6-24 | Cage 60516 |
26. | HL12VAP-6-24 | Cage 92215 |
27. | HL12VAP-6-24 | Cage 17446 |
28. | HL12VAP-6-24 | Cage 56878 |
29. | HL12VAP-6-24 | Cage 80539 |
30. | HL12VAP-6-24 | Cage 0PTK6 |
31. | HL12VAP-6-24 | Cage 97928 |
Nothing similar to this part number was found in our inventory
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.