Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL113VAZ-10-20 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.740in. and 1.760in. ⁓1-49/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
0.1270in. and 0.1295in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.3266in. and 0.3276in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.6287in. and 0.6335in.
A measurement of the longest dimension of the grip,in distinction from width.
1.245in. and 1.255in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
9200 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.3125in. ⁓21/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
16000 double pounds per square inch
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
color black on thread end
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4928 assn std single material response or ams 4967 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
aluminum
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
cagec 73197, spec 294 mfr ref single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1HD
Unjf
Titanium alloy uns r56400
16000 double pounds per square inch
1.245 inches minimum and 1.255 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 8108908000
nmfc 096320
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-415-3475 PIN-RIVET
unjf thread series aluminum surface treated color black on thread end 16000 double pounds per square inch shear strength 1.245" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 014153475
- NIIN Date
- 06/26/95
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- Item Weight
- 2.500lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,962.53 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HL113VAP-10-20 | Cage 06725 |
| 2. | HL113VAP-10-20 | Cage 80539 |
| 3. | HL113VAP-10-20 | Cage 56878 |
| 4. | HL113VAP-10-20 | Cage 17446 |
| 5. | HL113VAP-10-20 | Cage 5M902 |
| 6. | HL113VAP-10-20 | Cage 60516 |
| 7. | HL113VAP-10-20 | Cage 73197 |
| 8. | HL113VAP-10-20 | Cage L4528 |
| 9. | HL113VAP-10-20 | Cage 92215 |
| 10. | HL113VAP-10-20 | Cage 97928 |
| 11. | HL113VAP-10-20 | Cage 06725 |
| 12. | HL113VAP-10-20 | Cage 17446 |
| 13. | HL113VAP-10-20 | Cage 5M902 |
| 14. | HL113VAP-10-20 | Cage 60516 |
| 15. | HL113VAP-10-20 | Cage 92215 |
| 16. | HL113VAP-10-20 | Cage 73197 |
| 17. | HL113VAP-10-20 | Cage L4528 |
| 18. | HL113VAP-10-20 | Cage 80539 |
| 19. | HL113VAP-10-20 | Cage 56878 |
| 20. | HL113VAP-10-20 | Cage 97928 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for HL113VAZ-10-20 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL113VAZ-10-20 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
