Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HL110V79-6-6 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.
red
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.69in. and 0.71in. ⁓23/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk w/reverse chamfer
A measurement from the bottom to the top of the head,in distinction from depth.
0.045in. and 0.055in. ⁓1/16"
0.104in. and 0.119in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.2021in. and 0.2026in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.295in. and 0.315in.
0.318in. and 0.322in.
0.437in. and 0.457in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
cetyl alcohol, spec 305, HI-Shear corp
0.208in. and 0.212in.
The national stock number or the identification information of the end equipment for which the item is a part.
1520-01-457-5179
A measurement of the longest dimension of the grip,in distinction from width.
0.370in. and 0.380in.
The shortest straight line between flats,perpendicular to the height.
0.0791in. and 0.0806in. ⁓3/32"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
10.0in. ⁓10-1/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
6130 double pounds per square inch
The included angle of the countersink.
90.0 degrees
The style designation indicating the configuration that most nearly corresponds to the appearance of the collar.
threaded break off type
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
protruding shear head titanium 1/16 grip VARIATION-1/64 oversize HI-L
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
T-6 solution heat treated collar
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 collar
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
6AL-4V titanium alloy per AMS4928 or AMS4967 national spec single material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 or QQ-A-225/6 fed spec single material response collar
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize collar
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec single treatment response collar
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Titanium alloy bolt
Aluminum alloy 2024 collar
6130 double pounds per square inch
32
0.370 inches minimum and 0.380 inches maximum
Countersunk w/reverse chamfer
Right-hand
3b
FSC 5320 ⁓ Rivets
NSN 5320-01-607-1779 PIN-RIVET
Used on 1520-01-457-5179. unjf thread series anodize collar surface treated protruding shear head titanium 1/16 grip variation-1/64 oversize hi-l 6130 double pounds per square inch shear strength 32 thread quantity per inch 0.370" grip length countersunk w/reverse chamfer head style right-hand 3b thread class
- NIIN
- 016071779
- NIIN Date
- 06/04/12
- Schedule B
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $63.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HL110 | Cage 73197 |
| 2. | HL110 | Cage 73197 |
Major End Users Countries and entities
- - Department of The Army
Availability for HL110V79-6-6 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HL110V79-6-6 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
