Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. EL2202EN10-7 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.872in. and 0.892in. ⁓29/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.068in. and 0.078in. ⁓5/64"
0.1270in. and 0.1295in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.3115in. and 0.3120in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, straight, threaded
0.475in. and 0.505in.
The national stock number or the identification information of the end equipment for which the item is a part.
F-22
A measurement of the longest dimension of the grip,in distinction from width.
0.4375in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
6300 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.3125in. ⁓21/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
14600 double pounds per square inch
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
EDDIE-Bolt 2 pin
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material is 6A1-4V titanium
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
ams 2486 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Titanium alloy
14600 double pounds per square inch
24
0.4375 inches
Err-090
Right-hand
3a
Schedule B number: 8108908000
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-490-2174 PIN-RIVET
Used on F-22. unjf thread series anodize surface treated material is 6A1-4v titanium eddie-bolt 2 pin 14600 double pounds per square inch shear strength 24 thread quantity per inch 0.4375" grip length right-hand 3a thread class
- NIIN
- 014902174
- NIIN Date
- 09/21/01
- Schedule B
- 8108908000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- 1
- Historical Price
- $39.53 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for EL2202EN10-7 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
EL2202EN10-7 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
