Serving our customers with quality and safety first.
3a
RIGHT-Hand
1.052in. and 1.072in. ⁓1-5/64"
0.0791in. and 0.0801in.
0.1630in. and 0.1635in.
PIN-Rivet, straight, threaded
0.3304in.
solid film and cetyl alcohol, spec 305, HI-Shear corp
w/s: aircraft, hornet f/A-18; FMS-Aircraft, hornet f/A-18
0.755in.
32
160000 pounds per square inch
0.164in. ⁓11/64"
95000 single pounds per square inch
100.0 degrees
titanium alloy uns R56400
ams 4928 assn std single material response or ams 4967 assn std single material response
unjc
1EA
Unjc
Titanium alloy uns r56400
95000 single pounds per square inch
32
0.755 inches maximum
Err-090
Right-hand
3a
Schedule B number: 8108908000
nmfc 136500
Other wrought titanium
FSC 5320 ⁓ Rivets
Used on w/s: aircraft, hornet f/a-18; fms-aircraft, hornet f/a-18. unjc thread series 95000 single pounds per square inch shear strength 32 thread quantity per inch 0.755" grip length right-hand 3a thread class
1. | HLT313TB-5-12 | Cage 56878 |
2. | HLT313DL-5-12 | Cage 60516 |
3. | HLT313TB-5-12 | Cage 60516 |
4. | ST3M760V08-12 | Cage 76301 |
5. | HLT313DL-5-12 | Cage 5M902 |
6. | HLT313TB-5-12 | Cage 5M902 |
7. | HLT313DL-5-12 | Cage 73197 |
8. | HLT313DL-5-12 | Cage 56878 |
9. | HLT313DL-5-12 | Cage L4528 |
10. | HLT313TB-5-12 | Cage 06725 |
11. | HLT313DL-5-12 | Cage 06725 |
12. | HLT313DL-5-12 | Cage 17446 |
13. | HLT313TB-5-12 | Cage 17446 |
14. | ST3M760V08-12 | Cage 58998 |
15. | HLT313DL-5-12 | Cage K5673 |
16. | HLT313TB-5-12 | Cage K5673 |
17. | HLT313TB-5-12 | Cage 73197 |
18. | HLT313TB-5-12 | Cage L4528 |
19. | HLT313DL-5-12 | Cage 0PTK6 |
20. | HLT313TB-5-12 | Cage 0PTK6 |
21. | HLT313TB-5-12 | Cage 97928 |
22. | HLT313DL-5-12 | Cage 97928 |
23. | 10112014 | Cage A486G |
24. | HLT313TB-5-12 | Cage 92215 |
25. | HLT313DL-5-12 | Cage 92215 |
Nothing similar to this part number was found in our inventory
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.