Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 3D0090V9-46 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
3.646in. and 3.671in. ⁓3-43/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.268in. and 0.280in. ⁓9/32"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.6700in. and 0.6705in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
blind rivet, nut and bolt assembly
1.079in. and 1.096in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.555in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film and cetyl alcohol
The national stock number or the identification information of the end equipment for which the item is a part.
C-17
A measurement of the longest dimension of the grip,in distinction from width.
2.870in. and 2.885in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
34800 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.5625in. ⁓37/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
47200 double pounds per square inch
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
PIN-Rivet, threaded
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400 bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4928 assn std single material response bolt
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ASTM-A269 assn std single material response sleeve or MIL-T-8504 mil spec single material response sleeve
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Titanium alloy uns r56400 bolt
Steel comp 304 sleeve
47200 double pounds per square inch
18
2.870 inches minimum and 2.885 inches maximum
Err-090
Right-hand
3a
FSC 5320 ⁓ Rivets
NSN 5320-01-453-6302 PIN-RIVET
Used on C-17. unjf thread series pin-rivet, threaded 47200 double pounds per square inch shear strength 18 thread quantity per inch 2.870" grip length right-hand 3a thread class
- NIIN
- 014536302
- NIIN Date
- 03/06/98
- Schedule B
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $262.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | SB410V9L46S | Cage 27624 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 3D0090V9-46 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
3D0090V9-46 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
