Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12E44014-9 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.880in. ⁓2-57/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
A measurement from the bottom to the top of the head,in distinction from depth.
0.250in. ⁓1/4"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.280in. ⁓9/32"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
1.250in.
The length of the enlarged portion/s/ located on the shank of the item.
0.500in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.750in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
1.880in.
A measurement between specified points of the hole,in distinction from height.
1.120in.
A measurement of the longest dimension of the grip,in distinction from width.
1.170in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
countersunk threaded hole concentric in head RECTANGULARLY- shaped in first PHASE-Narrows to a 0.375 in. thread DIA-24 thr per in, unf thr SERIE0.700 thr LENGTH--Rectangle and threaded area 1.256 LONG--Countersunk hole in grooved end UNTHREADED-Approx 1.500deep
Answers.
1.170 inches
0.280 inches
Err-090
FSC 5320 ⁓ Rivets
NSN 5320-01-271-5381 PIN-RIVET
countersunk threaded hole concentric in head rectangularly- shaped in first phase-narrows to a 0.375 in. thread dia-24 thr per in, unf thr SERIE0.700 thr length--rectangle 1.170" grip length 0.280" hole diameter
- NIIN
- 012715381
- NIIN Date
- 01/27/88
- Schedule B
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $698.20 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for 12E44014-9 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
12E44014-9 / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
