Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 03A063-6-5L specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush countersunk
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.1890in. and 0.1895in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
PIN-Rivet, tapered, threaded
0.376in. and 0.381in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.181in. and 0.184in.
A substance designed to provide a reduction of friction between the two surfaces in contact.
solid film and cetyl alcohol
The national stock number or the identification information of the end equipment for which the item is a part.
ng nav system
A measurement of the longest dimension of the grip,in distinction from width.
0.3075in. and 0.3175in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
4350 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.1900in. ⁓13/64"
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
7060 double pounds per square inch
The included angle of the countersink.
100.0 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pin, threaded, hex point drive
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
solid film lubricant per MIL-L-46010 "KAL-Gard" type "fa" or HI-Kote 2 only and cetyl alcohol lube; hex drive point is .0791/.0801 width across flats, .080/.100 deep; .104/.119 dia
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 718
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5662 national spec single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
The document designator of the specification or standard which established the item of supply.
1W025-03A063 manufacturers standard
Answers.
Unjf
Nickel alloy 718
7060 double pounds per square inch
32
0.3075 inches minimum and 0.3175 inches maximum
Flush countersunk
Right-hand
3a
Schedule B number: 7508900000
nmfc 106510
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-01-616-8764 PIN-RIVET
Used on ng nav system. unjf thread series solid film lubricant per mil-l-46010 "kal-gard" type "fa" or hi-kote 2 only pin, threaded, hex point drive 7060 double pounds per square inch shear strength 32 thread quantity per inch 0.3075" grip length flush countersunk head style right-hand 3a thread class
- NIIN
- 016168764
- NIIN Date
- 03/01/13
- Schedule B
- 7508900000
- Name Code
- 67165
- FIIG
- A528U0
- QUP
- Historical Price
- $20.48 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HLT423SE-6-5 | Cage 06950 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 03A063-6-5L A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other pin-rivets with similar characteristics
Nothing similar to this part number was found in our inventory
03A063-6-5L / Pin-rivetWhat is the formal definition of this item?
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.
