KKF83K

KKF83K Panel Screw Assembly

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. KKF83K specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.840in. ⁓27/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

knurled no. 1

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.531in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.530in. ⁓17/32"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

slot

Material Accommodated Thickness
The thickness of the material to be accommodated.

0.155in. and 0.217in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

140000 pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 primary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 secondary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 fastener or steel comp 304 fastener or steel comp 305 fastener or steel comp 316 fastener or steel comp 384 fastener or iron alloy 660 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303 head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 spring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 STAND-Off

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5525 assn std single material response primary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A313 assn std single material response spring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5059 mil spec single material response secondary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec single material response STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Special Test Features
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

special quality control testing

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What class is the thread series?

Unf

What material is the panel screw assembly made of ?

Steel comp 304 stand-off

What material is the panel screw assembly made of ?

Steel comp 302 spring

What material is the panel screw assembly made of ?

Steel comp 303 head

What material is the panel screw assembly made of ?

Steel comp 302 fastener or steel comp 304 fastener or steel comp 305 fastener or steel comp 316 fastener or steel comp 384 fastener or iron alloy 660 fastener

What material is the panel screw assembly made of ?

Steel comp 301 secondary washer

What material is the panel screw assembly made of ?

Iron alloy 660 primary washer

What is the thread quantity per inch?

28

What is the head style?

Knurled no. 1

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for KKF83K?

5305-01-317-0435

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of KKF83K?

FSC 5305 ⁓ Screws

NSN 5305-01-317-0435 SCREW ASSEMBLY,PANEL

unf thread series passivate surface treated 28 thread quantity per inch knurled no. 1 head style right-hand 3a thread class

NIIN
013170435
NIIN Date
03/22/90
Schedule B
7318152000 
Name Code
33044
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
 
Historical Price
$132.10 AY
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. FRBHE-7500-12-D-6 Cage 58998
2. FRBHE-7500-12-D-6 Cage 17446
3. FRBHE-7500-12-D-6 Cage 97928
4. LL-HX-4624 Cage 14153

Major End Users Countries and entities

  • - Department of The Navy 

Availability for KKF83K A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screw assemblys with similar characteristics

Nothing similar to this part number was found in our inventory

KKF83K / Screw assembly,panelWhat is the formal definition of this item?

A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.