FRSS7500HS-10-B-2 Panel Screw Assembly

Datasheet. FRSS7500HS-10-B-2 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.134in. ⁓1-9/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

knurled no. 5

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.451in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.520in. ⁓17/32"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

hexagon

Material Accommodated Thickness
The thickness of the material to be accommodated.

0.020in. and 0.030in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Width Across Flats
The shortest straight line between flats,perpendicular to the height.

0.031in. ⁓1/32"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

TURN-Loc, high profile, aluminum knob; hex socket recess

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1050 secondary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 primary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 spring or steel comp 304 spring or steel comp 305 spring or steel comp 310 spring or steel comp 316 spring or steel comp 347 spring or steel comp 410 spring or steel comp 420 spring or steel comp 430 spring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium STAND-Off and chromate STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate fastener

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate primary washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate spring

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf