Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FRSS7500-10-E-6DL specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.872in. and 0.912in. ⁓59/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.451in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.520in. ⁓17/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The thickness of the material to be accommodated.
0.218in. and 0.279in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
supply with 2 spring washers, carbon steel per aisi 1050; wave shaped; finish cadmium per QQ-P-416, ty 2 cl 2
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 6061 head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 301 primary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 301 secondary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 fastener
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 spring or steel comp 304 spring or steel comp 305 spring or steel comp 316 spring or steel comp 321 spring or steel comp 347 spring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 STAND-Off
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A580 assn std all material responses spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A582 assn std single material response fastener
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec single material response primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec single material response secondary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/8 fed spec single material response head
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec single material response STAND-Off
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize head
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate fastener
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate primary washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate secondary washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate spring
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate STAND-Off
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 ty 1 cl 1 mil spec single treatment response head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response fastener
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response secondary washer
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response spring
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response STAND-Off
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel comp 304 stand-off
Steel comp 302 spring or steel comp 304 spring or steel comp 305 spring or steel comp 316 spring or steel comp 321 spring or steel comp 347 spring
Steel comp 303 fastener
Steel comp 301 secondary washer
Steel comp 301 primary washer
Aluminum alloy 6061 head
32
Flat chamfer
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-250-3293 SCREW ASSEMBLY,PANEL
unf thread series passivate stand-off surface treated supply with 2 spring washers, carbon steel per aisi 1050; wave shaped; finish cadmium per qq-p-416, ty 2 cl 2 32 thread quantity per inch flat chamfer head style right-hand 2a thread class
- NIIN
- 012503293
- NIIN Date
- 02/27/87
- Schedule B
- 7318152000
- Name Code
- 33044
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $38.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 11438307-18 | Cage 18876 |
| 2. | FRSS7500-10-E-6 | Cage 0HDW7 |
| 3. | FT1300-10-5-6DL | Cage 58794 |
| 4. | FRSS7500-10-E-6 | Cage 97928 |
| 5. | FT1300-10-5-6 | Cage 58794 |
| 6. | 11438307-18 | Cage 18876 |
| 7. | FRSS7500-10-E-6 | Cage 0HDW7 |
| 8. | FT1300-10-5-6DL | Cage 58794 |
| 9. | FT1300-10-5-6 | Cage 58794 |
| 10. | FRSS7500-10-E-6 | Cage 97928 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Germany
- - Greece
Availability for FRSS7500-10-E-6DL A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screw assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
FRSS7500-10-E-6DL / Screw assembly,panelWhat is the formal definition of this item?
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.
