FLW-7900-8-A-2.5

FLW79008A25 Panel Screw Assembly

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. FLW-7900-8-A-2.5 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.250in. ⁓1/4"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.687in. and 0.727in. ⁓47/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

fillister

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.314in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.081in. ⁓3/32"

Material Accommodated Thickness
The thickness of the material to be accommodated.

0.031in. and 0.050in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.164in. (UTS #8)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

80000 pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 spring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5735 assn std single material response fastener or AMS5736 assn std single material response fastener or AMS5737 assn std single material response fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5059 mil spec single material response primary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-225/8 fed spec single material response STAND-Off

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-W-423 comp FS302 cond b fed spec single material response spring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate fastener

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate primary washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate secondary washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate spring

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 ty 1 cl 1 mil spec single treatment response STAND-Off

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response fastener

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response primary washer

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response secondary washer

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response spring

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unc

What material is the panel screw assembly made of ?

Steel comp 302 spring

What is the thread quantity per inch?

32

What is the head style?

Fillister

What is the thread length?

0.250 inches

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for FLW-7900-8-A-2.5?

5305-01-084-0036

What's the federal classification of FLW-7900-8-A-2.5?

FSC 5305 ⁓ Screws

NSN 5305-01-084-0036 SCREW ASSEMBLY,PANEL

unc thread series passivate spring surface treated 32 thread quantity per inch fillister head style 0.250" thread length right-hand 2a thread class

NIIN
010840036
NIIN Date
10/06/79
Schedule B
 
Name Code
33044
FIIG
A003B0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$134.15 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 583R583H17 Cage 97942
2. 583R583H17 Cage 58794
3. 583R583H17 Cage 0HDW7

Major End Users Countries and entities

  • - Department of The Army 
  • - Department of The Air Force 
  • - Poland 
  • - Belgium 
  • - Republic of Korea 
  • - Norway 
  • - Greece 

Availability for FLW-7900-8-A-2.5 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screw assemblys with similar characteristics

Nothing similar to this part number was found in our inventory

FLW-7900-8-A-2.5 / Screw assembly,panelWhat is the formal definition of this item?

A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.