Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CA30074-1080 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.485in. and 0.515in. ⁓33/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.760in. ⁓1-49/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.230in. and 0.250in. ⁓1/4"
0.490in. and 0.505in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The thickness of the material to be accommodated.
0.030in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
item provided with a nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 fastener
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 primary washer or steel comp 303 primary washer or steel comp 304 primary washer or steel comp 305 primary washer or steel comp 309 primary washer or steel comp 310 primary washer or steel comp 316 primary washer or steel comp 317 primary washer or steel comp 321 primary washer or steel comp 322 primary washer or steel comp 324 primary washer or steel comp 347 primary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 secondary washer or steel comp 303 secondary washer or steel comp 304 secondary washer or steel comp 305 secondary washer or steel comp 309 secondary washer or steel comp 310 secondary washer or steel comp 316 secondary washer or steel comp 317 secondary washer or steel comp 321 secondary washer or steel comp 322 secondary washer or steel comp 324 secondary washer or steel comp 347 secondary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5737 assn std single material response fastener or ams 5731 assn std single material response fastener
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A580 assn std single material response spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec all material responses secondary washer or astm A582 assn std all material responses secondary washer or MIL-S-5059 mil spec all material responses secondary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec all material responses primary washer or astm A582 assn std all material responses primary washer or IL-S-5059 mil spec all material responses primary washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Steel comp 302 spring
Steel comp 302 secondary washer or steel comp 303 secondary washer or steel comp 304 secondary washer or steel comp 305 secondary washer or steel comp 309 secondary washer or steel comp 310 secondary washer or steel comp 316 secondary washer or steel comp 317 secondary washer or steel comp 321 secondary washer or steel comp 322 secondary washer or steel comp 324 secondary washer or steel comp 347 secondary washer
Steel comp 302 primary washer or steel comp 303 primary washer or steel comp 304 primary washer or steel comp 305 primary washer or steel comp 309 primary washer or steel comp 310 primary washer or steel comp 316 primary washer or steel comp 317 primary washer or steel comp 321 primary washer or steel comp 322 primary washer or steel comp 324 primary washer or steel comp 347 primary washer
Iron alloy 660 fastener
28
Hexagon
0.485 inches minimum and 0.515 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-333-0039 SCREW ASSEMBLY,PANEL
unf thread series passivate surface treated item provided with a nut 28 thread quantity per inch hexagon head style 0.485" thread length right-hand 3a thread class
- NIIN
- 013330039
- NIIN Date
- 01/21/91
- Schedule B
- 7318152000
- Name Code
- 33044
- FIIG
- A003B0
- QUP
- Historical Price
- $66.50 AY
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 867000-0017 | Cage 06481 |
| 2. | 867000-17 | Cage 06481 |
| 3. | 867000-17 | Cage 13973 |
| 4. | 867000-0017 | Cage 13973 |
Major End Users Countries and entities
- - U.s. Marine Corps
- - Department of The Air Force
Availability for CA30074-1080 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screw assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
CA30074-1080 / Screw assembly,panelWhat is the formal definition of this item?
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.
