Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CA28139-3B-10P specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.298in. and 0.327in. ⁓21/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.267in. ⁓1-9/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
fillister
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.285in. and 0.315in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.118in. and 0.130in. ⁓9/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
Those features,not otherwise specified,which may be required for proper functioning of the item.
flat washer and lock washer and sleeve
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 fastener or steel comp 303se fastener or steel comp 303 plus x fastener
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 STAND-Off or steel comp 303se STAND-Off or steel comp 303 plus x STAND-Off
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 secondary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 302 spring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5640 assn std all material responses STAND-Off and astm A484 assn std all material responses STAND-Off and astm A582 assn std all material responses STAND-Off
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A313 assn std single material response spring and astm A580 assn std single material response spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec single material response secondary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 300 series fed spec single material response primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763 fed spec all material responses fastener and ams 5640 assn std all material responses fastener and astm A484 assn std all material responses fastener and astm A582 assn std all material responses fastener
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel corrosion resisting primary washer
Steel comp 302 spring
Steel comp 302 secondary washer
Steel comp 303 stand-off or steel comp 303se stand-off or steel comp 303 plus x stand-off
Steel comp 303 fastener or steel comp 303se fastener or steel comp 303 plus x fastener
32
Fillister
0.298 inches minimum and 0.327 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-393-3739 SCREW ASSEMBLY,PANEL
unf thread series oxide surface treated 32 thread quantity per inch fillister head style 0.298" thread length right-hand 3a thread class
- NIIN
- 013933739
- NIIN Date
- 07/19/94
- Schedule B
- 7318152000
- Name Code
- 33044
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $31.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | FTK7008-5 | Cage 58794 |
| 2. | A3093679-1 | Cage 80063 |
Major End Users Countries and entities
- - Department of The Army
Availability for CA28139-3B-10P A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screw assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
CA28139-3B-10P / Screw assembly,panelWhat is the formal definition of this item?
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.
