CA28106-06-7PK

CA28106067PK Panel Screw Assembly

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. CA28106-06-7PK specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.297in. and 0.327in. ⁓21/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.423in. ⁓7/16"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

knurled no. 5

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.280in. and 0.320in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.775in. and 0.835in. ⁓27/32"

Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.

cross recess type 1

Material Accommodated Thickness
The thickness of the material to be accommodated.

0.062in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.138in. (UTS #6)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

720000 pounds per square inch

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 secondary washer or steel comp 302 secondary washer or steel comp 302b secondary washer or steel comp 303 secondary washer or steel comp 303se secondary washer or steel comp 304 secondary washer or steel comp 304l secondary washer or steel comp 305 secondary washer or steel comp 308 secondary washer or steel comp 309 secondary washer or steel comp 309s secondary washer or steel comp 310 secondary washer or steel comp 310s secondary washer or steel comp 314 secondary washer or steel comp 316 secondary washer or steel comp 316l secondary washer or steel comp 317 secondary washer or steel comp 321 secondary washer or steel comp 347 secondary washer or steel comp 348 secondary washer or steel comp 384 secondary washer or steel comp 385 secondary washersteel comp 302 primary washer or steel comp 302b primary washer or steel comp 303 primary washer or steel comp 303 plus x primary washer or steel comp 303se primary washer or steel comp 303cu primary washer or steel comp 303ma primary washer or steel comp 304 primary washer or steel comp 304l primary washersteel comp 302 spring or steel comp 302b spring or steel comp 303 spring or steel comp 303 plus x spring or steel comp 303se spring or steel comp 303cu spring or steel comp 303ma spring or steel comp 304 spring or steel comp 304l springsteel comp 302 STAND-Off or steel comp 302b STAND-Off or steel comp 303 STAND-Off or steel comp 303 plus x STAND-Off or steel comp 303se STAND-Off or steel comp 303cu STAND-Off or steel comp 303ma STAND-Off or steel comp 304 STAND-Off or steel comp 304l STAND-Offsteel comp 301 threads or steel comp 302 threads or steel comp 302b threads or steel comp 303 threads or steel comp 303se threads or steel comp 304 threads or steel comp 304l threads or steel comp 305 threads or steel comp 308 threads or steel comp 309 threads or steel comp 309s threads or steel comp 310 threads or steel comp 310s threads or steel comp 314 threads or steel comp 316 threads or steel comp 316l threads or steel comp 317 threads or steel comp 321 threads or steel comp 347 threads or steel comp 348 threads or steel comp 384 threads or steel comp 385 threads

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate secondary washerpassivate primary washerpassivate springpassivate STAND-Offpassivate threads

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response secondary WASHERQQ-P-35 fed spec single treatment response primary WASHERQQ-P-35 fed spec single treatment response SPRINGQQ-P-35 fed spec single treatment response STAND-OFFQQ-P-35 fed spec single treatment response threads

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unc

What material is the panel screw assembly made of ?

Steel comp 301 secondary washer or steel comp 302 secondary washer or steel comp 302b secondary washer or steel comp 303 secondary washer or steel comp 303se secondary washer or steel comp 304 secondary washer or steel comp 304l secondary washer or steel comp 305 secondary washer or steel comp 308 secondary washer or steel comp 309 secondary washer or steel comp 309s secondary washer or steel comp 310 secondary washer or steel comp 310s secondary washer or steel comp 314 secondary washer or steel comp 316 secondary washer or steel comp 316l secondary washer or steel comp 317 secondary washer or steel comp 321 secondary washer or steel comp 347 secondary washer or steel comp 348 secondary washer or steel comp 384 secondary washer or steel comp 385 secondary washersteel comp 302 primary washer or steel comp 302b primary washer or steel comp 303 primary washer or steel comp 303 plus x primary washer or steel comp 303se primary washer or steel comp 303cu primary washer or steel comp 303ma primary washer or steel comp 304 primary washer or steel comp 304l primary washersteel comp 302 spring or steel comp 302b spring or steel comp 303 spring or steel comp 303 plus x spring or steel comp 303se spring or steel comp 303cu spring or steel comp 303ma spring or steel comp 304 spring or steel comp 304l springsteel comp 302 stand-off or steel comp 302b stand-off or steel comp 303 stand-off or steel comp 303 plus x stand-off or steel comp 303se stand-off or steel comp 303cu stand-off or steel comp 303ma stand-off or steel comp 304 stand-off or steel comp 304l stand-offsteel comp 301 threads or steel comp 302 threads or steel comp 302b threads or steel comp 303 threads or steel comp 303se threads or steel comp 304 threads or steel comp 304l threads or steel comp 305 threads or steel comp 308 threads or steel comp 309 threads or steel comp 309s threads or steel comp 310 threads or steel comp 310s threads or steel comp 314 threads or steel comp 316 threads or steel comp 316l threads or steel comp 317 threads or steel comp 321 threads or steel comp 347 threads or steel comp 348 threads or steel comp 384 threads or steel comp 385 threads

What is the thread quantity per inch?

32

What is the head style?

Knurled no. 5

What is the thread length?

0.297 inches minimum and 0.327 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for CA28106-06-7PK?

5305-01-372-3021

What's the federal classification of CA28106-06-7PK?

FSC 5305 ⁓ Screws

NSN 5305-01-372-3021 SCREW ASSEMBLY,PANEL

unc thread series passivate secondary washerpassivate primary washerpassivate springpassivate stand-offpassivate threads surface treated 32 thread quantity per inch knurled no. 5 head style 0.297" thread length right-hand 3a thread class

NIIN
013723021
NIIN Date
03/05/93
Schedule B
 
Name Code
33044
FIIG
A003B0
Item Weight
0.200lbs
Item Dimensions
--
QUP
Historical Price
$153.03 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for CA28106-06-7PK A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other screw assemblys with similar characteristics

Nothing similar to this part number was found in our inventory

CA28106-06-7PK / Screw assembly,panelWhat is the formal definition of this item?

A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.