Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 90650A404 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a/2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.53in. ⁓17/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.25in. ⁓1-1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
round
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.425in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.125in. ⁓1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
one way
The national stock number or the identification information of the end equipment for which the item is a part.
1440-01-087-9844
The thickness of the material to be accommodated.
1.25in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
Those features,not otherwise specified,which may be required for proper functioning of the item.
sleeve
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
85000 pounds per square inch
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
85.0 rockwell b
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, MACHINE-Partition sexbolt, tamperproof
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
item is a two part assembly; sleeve style end is the same thread size as screw end with internal threads that allow for screw end and sleeve end to fit together tightly; this item requires a special driver for removal since it is a ONE-Way head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
300 series cres equal to 18-8 chromium nickel alloy iaw QQ-S-763 or FED-STD-66 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response or astm A380 assn std single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel corrosion resisting
24
Round
0.53 inches
Right-hand
2a/2b
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-610-2196 SCREW ASSEMBLY,PANEL
Used on 1440-01-087-9844. unc thread series passivate surface treated item is a two part assembly; sleeve style end is the same thread size as screw end with internal threads that allow for screw end bolt, machine-partition sexbolt, tamperproof 24 thread quantity per inch round head style 0.53" thread length right-hand 2a/2b thread class
- NIIN
- 016102196
- NIIN Date
- 08/13/12
- Schedule B
- 7318152000
- Name Code
- 33044
- FIIG
- A003B0
- QUP
- Historical Price
- $19.80 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 11477986 | Cage 18876 |
Major End Users Countries and entities
- - Department of The Army
- - Germany
- - Netherlands
- - Nato Maintenance And Supply Agency
Availability for 90650A404 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096640 SCREWS, IRON OR STEEL
- UFC (universal freight code)
- 50600
Similar by Design Other screw assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
90650A404 / Screw assembly,panelWhat is the formal definition of this item?
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.
