Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7010504-002 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.635in. and 1.675in. ⁓1-11/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
fillister
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.356in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.385in. ⁓25/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type 1
The thickness of the material to be accommodated.
0.094in. and 0.155in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.138in. (UTS #6)
Those features,not otherwise specified,which may be required for proper functioning of the item.
washer
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
WASHER-2 required
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black head
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black primary washer
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black threads
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 6061 head
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 6061 STAND-Off
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting primary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting spring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting threads
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm 493 assn std single material response threads
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A313 assn std single material response spring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-5059 mil spec single material response primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/8 fed spec single material response head
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/8 fed spec single material response STAND-Off
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize head
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize STAND-Off
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide primary washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide threads
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate spring
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, ty i, cl 1 mil spec single treatment response STAND-Off
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8525, ty ii, cl 2 mil spec single treatment response head
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924, cl 2 mil spec single treatment response primary washer
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-13924, cl 2 mil spec single treatment response threads
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response spring
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel corrosion resisting threads
Steel corrosion resisting spring
Steel corrosion resisting primary washer
Aluminum alloy 6061 stand-off
Aluminum alloy 6061 head
32
Fillister
Right-hand
3a
Schedule B number: 7616106000
nmfc 093486
Threaded fasteners of aluminum
FSC 5305 ⁓ Screws
NSN 5305-01-407-3432 SCREW ASSEMBLY,PANEL
unf thread series passivate spring surface treated washer-2 required 32 thread quantity per inch fillister head style right-hand 3a thread class
- NIIN
- 014073432
- NIIN Date
- 01/26/95
- Schedule B
- 7616106000
- Name Code
- 33044
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $53.08 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | FT1100P6-3-9B | Cage 58794 |
Major End Users Countries and entities
- - Department of The Air Force
- - Poland
Availability for 7010504-002 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screw assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
7010504-002 / Screw assembly,panelWhat is the formal definition of this item?
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. attached to panel by threaded bushing or by flaring end of stand-off, or bushing. used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. may be spring loaded.
